Module:Convert/text
 |
This module is subject to page protection. It is a highly visible module in use by a very large number of pages, or is substituted very frequently. Because vandalism or mistakes would affect many pages, and even trivial editing might cause substantial load on the servers, it is protected from editing. |
This page defines text used by Module:Convert. All documentation (from Module:Convert/doc) is at that module. The text includes messages and categories output by the module, and parameters used as input.
This is a separate module to simplify translation for use on another wiki. For example, see translation_table and the other tables in bn:Module:Convert/text. Documentation is at Template:Convert/Transwiki guide.
Any changes should first be tested at Module:Convert/text/sandbox—see Template:Convert/testcases#Sandbox testcases.
-- Text used by Module:Convert for enwiki.
-- This is a separate module to simplify translation for use on another wiki.
-- See [[:en:Template:Convert/Transwiki guide]] if copying to another wiki.
-- Some units accept an SI prefix before the unit code, such as "kg" for kilogram.
local SIprefixes = {
-- The prefix field is what the prefix should be, if different from the prefix used.
['Q'] = { exponent = 30, name = 'quetta', },
['R'] = { exponent = 27, name = 'ronna', },
['Y'] = { exponent = 24, name = 'yotta', },
['Z'] = { exponent = 21, name = 'zetta', },
['E'] = { exponent = 18, name = 'exa' , },
['P'] = { exponent = 15, name = 'peta' , },
['T'] = { exponent = 12, name = 'tera' , },
['G'] = { exponent = 9, name = 'giga' , },
['M'] = { exponent = 6, name = 'mega' , },
['k'] = { exponent = 3, name = 'kilo' , },
['h'] = { exponent = 2, name = 'hecto', },
['da']= { exponent = 1, name = 'deca' , name_us = 'deka' },
['d'] = { exponent = -1, name = 'deci' , },
['c'] = { exponent = -2, name = 'centi', },
['m'] = { exponent = -3, name = 'milli', },
['μ'] = { exponent = -6, name = 'micro', }, -- key = 'GREEK SMALL LETTER MU' (U+03BC) utf-8 CE BC
['µ'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- key = 'MICRO SIGN' (U+00B5) utf-8 C2 B5
['u'] = { exponent = -6, name = 'micro', prefix = 'μ' }, -- not an SI prefix, but allow for people typing this
['n'] = { exponent = -9, name = 'nano' , },
['p'] = { exponent =-12, name = 'pico' , },
['f'] = { exponent =-15, name = 'femto', },
['a'] = { exponent =-18, name = 'atto' , },
['z'] = { exponent =-21, name = 'zepto', },
['y'] = { exponent =-24, name = 'yocto', },
['r'] = { exponent =-27, name = 'ronto', },
['q'] = { exponent =-30, name = 'quecto', },
}
-- Some units can be qualified with one of the following prefixes, when linked.
local customary_units = {
{ "US", link = "United States customary units" },
{ "U.S.", link = "United States customary units" },
{ "imperial", link = "Imperial units" },
{ "imp", link = "Imperial units" },
}
-- Names when using engineering notation (a prefix of "eN" where N is a number; example "e6km").
-- key = { "name", link = "article title", exponent = numeric_key_value }
-- If lk=on and link is defined, the name of the number will appear as a link.
local eng_scales = {
["3"] = { "thousand", exponent = 3 },
["6"] = { "million", exponent = 6 },
["9"] = { "billion", link = "1000000000 (number)", exponent = 9 },
["12"] = { "trillion", link = "1000000000000 (number)", exponent = 12 },
["15"] = { "quadrillion", link = "1000000000000000 (number)", exponent = 15 },
}
local all_categories = {
unit = "[[Category:Convert errors]]",
option = "[[Category:Convert errors]]",
warning = '[[Category:Convert invalid options]]',
tracking = '[[Category:Convert tracking]]',
}
-- For some error messages, the following puts the wanted style around
-- each unit code marked like '...%{ft%}...'.
local unitcode_regex = '%%([{}])'
local unitcode_replace = { ['{'] = '"', ['}'] = '"' } -- no longer need the more elaborate substitute used before 2013-09-28
-- All messages that may be displayed if a problem occurs.
local all_messages = {
-- Message format string: $1=title, $2=text, $3=category, $4=anchor.
-- Each displayed message starts with "Convert:" so can easily locate by searching article.
cvt_format = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[<i>[[Help:Convert messages#$4|<span title="Convert: $1">convert: $2</span>]]</i>]</sup>$3<span class="error"></span>',
cvt_format2 = '<sup class="noprint Inline-Template" style="white-space:nowrap;">[[Help:Convert messages#$4|<span title="Convert: $1">$2</span>]]</sup>$3<span class="error"></span>',
cvt_format_preview = '<strong class="error">Error in convert: $1 [[Help:Convert messages#$4|(help)]]</strong>$3',
-- Each of following messages is a table:
-- { [1] = 'title', -- mouseover title text
-- [2] = 'text', -- link text displayed in article
-- [3] = 'category key', -- key to lookup category in all_categories
-- [4] = 'anchor', -- anchor for link to relevant section on help page
-- regex = gsub_regex,
-- replace = gsub_table,
-- } Mouseover title text Link text CatKey Anchor
cvt_bad_input = { 'input "$1" must be a number and unit' , 'invalid input' , 'option', 'invalid_input' },
cvt_bad_num = { 'Value "$1" must be a number' , 'invalid number' , 'option', 'invalid_number' },
cvt_big_prec = { 'Precision "$1" is too large' , 'precision too large' , 'option', 'precision_too_large' },
cvt_invalid_num = { 'Number has overflowed' , 'number overflow' , 'option', 'number_overflow' },
cvt_no_num = { 'Needs the number to be converted' , 'needs a number' , 'option', 'needs_number' },
cvt_no_num2 = { 'Needs another number for a range' , 'needs another number', 'option', 'needs_another_number' },
cvt_bad_altitude = { '"$1" needs an integer' , 'invalid altitude' , 'option', 'invalid_altitude' },
cvt_bad_frac = { '"$1" needs an integer above 1' , 'invalid fraction' , 'option', 'invalid_fraction' },
cvt_bad_prec = { 'Precision "$1" must be an integer' , 'invalid precision' , 'option', 'invalid_precision' },
cvt_bad_sigfig = { '"$1" needs a positive integer' , 'invalid sigfig' , 'option', 'invalid_sigfig' },
cvt_empty_option = { 'Ignored empty option "$1"' , 'empty option' , 'option', 'empty_option' },
cvt_deprecated = { 'Option "$1" is deprecated' , '*' , 'option', 'deprecated_option', format = 'cvt_format2', nowarn = true },
cvt_no_spell = { 'Spelling is not available' , 'bug, ask for help' , 'option', 'ask_for_help' },
cvt_unknown_option = { 'Ignored invalid option "$1"' , 'invalid option' , 'option', 'invalid_option' },
cvt_wd_fail = { 'Unable to access Wikidata' , 'wikidata problem' , 'option', 'wikidata_problem' },
cvt_bad_default = { 'Unit "$1" has an invalid default' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_bad_unit = { 'Unit "$1" is invalid here' , 'unit invalid here' , 'unit' , 'unit_invalid_here' },
cvt_no_default = { 'Unit "$1" has no default output unit' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_no_unit = { 'Needs name of unit' , 'needs unit name' , 'unit' , 'needs_unit_name' },
cvt_unknown = { 'Unit name "$1" is not known' , 'unknown unit' , 'unit' , 'unknown_unit' },
cvt_should_be = { '$1' , 'ambiguous unit' , 'unit' , 'ambiguous_unit', regex = unitcode_regex, replace = unitcode_replace },
cvt_mismatch = { 'Cannot convert "$1" to "$2"' , 'unit mismatch' , 'unit' , 'unit_mismatch' },
cvt_bug_convert = { 'Bug: Cannot convert between specified units', 'bug, ask for help' , 'unit' , 'ask_for_help' },
cvt_lookup = { 'Unit "$1" is incorrectly defined' , 'bug, ask for help' , 'unit' , 'ask_for_help' },
}
-- Text to join input value/unit with output value/unit.
local disp_joins = {
-- [1]=before output, [2]=after output, [3]=between outputs in a combination; default "; "
-- [wantname] gives default abbr=off
["or"] = { " or " , "" , " or ", wantname = true },
["sqbr-sp"] = { " [" , "]" },
["sqbr-nbsp"] = { " [" , "]" },
["comma"] = { ", " , "" , ", " },
["semicolon"] = { "; " , "" },
["slash-sp"] = { " / " , "" , wantname = true },
["slash-nbsp"] = { " / ", "" , wantname = true },
["slash-nosp"] = { "/" , "" , wantname = true },
["b"] = { " (" , ")" },
["(or)"] = { " (" , ")", " or " },
["br"] = { "<br />" , "" , wantname = true },
["br()"] = { "<br />(" , ")", wantname = true },
}
-- Text to separate values in a range.
local range_types = {
-- Specifying a table requires either:
-- * "off" and "on" values (for "abbr=off" and "abbr=on"), or
-- * "input" and "output" values (for LHS and RHS);
-- other fields are optional.
-- When "adj=on|abbr=off" applies, spaces in range text are replaced with hyphens.
-- With "exception = true", that also occurs with "adj=on|abbr=on".
-- If "adj" is defined here, that text (unchanged) is used with "adj=on".
["+"] = " + ",
[","] = ", ",
[", and"] = ", and ",
[", or"] = ", or ",
["by"] = " by ",
["-"] = "–",
["to about"] = " to about ",
["and"] = { off = " and ", on = " and ", exception = true },
["and(-)"] = { input = " and ", output = "–" },
["or"] = { off = " or " , on = " or " , exception = true },
["to"] = { off = " to " , on = " to " , exception = true },
["to(-)"] = { input = " to ", output = "–" },
["+/-"] = { off = " ± ", on = " ± ", adj = " ± ", is_range_change = true },
["by(x)"] = { input = " by ", output = " × ", out_range_x = true },
["x"] = { off = " by ", on = " × ", abbr_range_x = true },
["xx"] = " × ",
["*"] = "×",
["/"] = " / ", -- for a table of high/low temperatures with {{convert|83|/|63|F|disp=br()|abbr=values}}
}
local range_aliases = {
-- ["alternative name for a range"] = "standard range name"
["–"] = "-",
["–"] = "-",
["×"] = "x",
["×"] = "x",
["±"] = "+/-",
["±"] = "+/-",
}
-- Convert accepts range text delimited with whitespace, for example, {{convert|1 to 2|ft}}.
-- In addition, the following "words" are accepted without spaces, for example, {{convert|1-2|ft}}.
-- Words must be in correct order for searching, for example, 'x' after 'xx'.
local range_words = { '-', '–', 'xx', 'x', '*' }
local ranges = {
types = range_types,
aliases = range_aliases,
words = range_words,
}
-- Valid option names.
local en_option_name = {
-- ["local text for option name"] = "en name used in this module"
["$"] = "$",
["abbr"] = "abbr",
["adj"] = "adj",
["altitude_ft"] = "altitude_ft",
["altitude_m"] = "altitude_m",
["comma"] = "comma",
["debug"] = "debug",
["disp"] = "disp",
["frac"] = "frac",
["input"] = "input",
["lang"] = "lang",
["lk"] = "lk",
["order"] = "order",
["qid"] = "qid",
["qual"] = "qual",
["qualifier"] = "qual",
["round"] = "round",
["sigfig"] = "sigfig",
["sing"] = "adj", -- "sing" is an old alias for "adj"
["sortable"] = "sortable",
["sp"] = "sp",
["spell"] = "spell",
["stylein"] = "stylein",
["styleout"] = "styleout",
["tracking"] = "tracking",
}
-- Valid option values.
-- Convention: parms.opt_xxx refers to an option that is set here
-- (not intended to be set by the template which invokes this module).
-- Example: At enwiki, "abbr" includes:
-- ["values"] = "opt_values"
-- As a result, if the template uses abbr=values, Module:Convert sets:
-- parms["opt_values"] = true
-- parms["abbr"] = nil
-- Therefore parms.abbr will be nil, or will have one of the listed values
-- that do not start with "opt_".
-- An option value of form "xxx?" is the same as "xxx" but shows the input as deprecated.
local en_option_value = {
["$"] = 'TEXT', -- TEXT should be a currency symbol that will be used instead of "$"
["abbr"] = {
-- ["local text for option value"] = "en value used in this module"
["def"] = "", -- ignored (some wrapper templates call convert with "abbr=def" to mean "default abbreviation")
["h"] = "on", -- abbr=on + use "h" for hand unit (default)
["hh"] = "opt_hand_hh", -- abbr=on + use "hh" for hand unit
["in"] = "in", -- use symbol for LHS unit
["none"] = "off", -- old name for "off"
["off"] = "off", -- use name for all units
["on"] = "on", -- use symbol for all units
["out"] = "out", -- use symbol for RHS unit (default)
["unit"] = "unit", -- abbr=on but abbreviate units only: e6km → million km (not ×10⁶ km)
["values"] = "opt_values", -- show only input and output numbers, not units
["~"] = "opt_also_symbol", -- show input unit symbol as well as name
},
["adj"] = {
["mid"] = "opt_adjectival, opt_adj_mid", -- adj=on with user-specified text after input unit (between input and output)
["off"] = "", -- ignored (off is the default)
["on"] = "opt_adjectival", -- unit name is singular and hyphenated
["pre"] = "opt_one_preunit", -- user-specified text before input unit
["ri0"] = "opt_ri=0", -- round input with precision = 0
["ri1"] = "opt_ri=1", -- round input with precision = 1
["ri2"] = "opt_ri=2", -- round input with precision = 2
["ri3"] = "opt_ri=3", -- round input with precision = 3
},
["altitude_ft"] = 'INTEGER',
["altitude_m"] = 'INTEGER',
["comma"] = {
["5"] = "opt_comma5", -- only use numsep grouping if 5 or more digits
["gaps"] = "opt_gaps", -- use gaps, not numsep, to separate groups of digits
["gaps3"] = "opt_gaps, opt_gaps3", -- group only in threes rather than default of no gap before a single digit after decimal mark
["off"] = "opt_nocomma", -- no numsep in input or output numbers
},
["debug"] = {
["yes"] = "opt_sortable_debug", -- make the normally hidden sort key visible
},
["disp"] = {
["5"] = "opt_round=5?", -- round output value to nearest 5
["b"] = "b", -- join: '(...)'
["(or)"] = "(or)", -- join: '(...)' with 'or' between outputs in a combination
["br"] = "br", -- join: '<br />'
["br()"] = "br()", -- join: '<br />(...)'
["comma"] = "comma", -- join: ','
["flip"] = "opt_flip", -- reverse order of input/output
["number"] = "opt_output_number_only", -- display output value (not input, and not output symbol/name)
["or"] = "or", -- join: 'or'
["out"] = "opt_output_only",
["output number only"] = "opt_output_number_only",
["output only"] = "opt_output_only",
["preunit"] = "opt_two_preunits", -- user-specified text before input and output units
["semicolon"] = "semicolon", -- join: ';'
["sqbr"] = "sqbr", -- join: '[...]'
["table"] = "opt_table", -- output is suitable for a table cell with align="right"
["tablecen"] = "opt_tablecen", -- output is suitable for a table cell with align="center"
["unit"] = "opt_input_unit_only", -- display input symbol/name (not output, and not input value)
["unit or text"] = "opt_input_unit_only, opt_ignore_error", -- display input symbol/name, or given unit code if not known
["unit2"] = "opt_output_unit_only",
["x"] = "x", -- join: <first>...<second> (user-specified text)
},
["frac"] = 'INTEGER',
["input"] = 'TEXT', -- TEXT should be value><space><unitcode> or <wikidata-property-id>
["lang"] = { -- language for output digits (both en and local digits are always accepted for input)
["en"] = "opt_lang_en", -- use en digits for numbers, regardless of local language
["local"] = "opt_lang_local", -- use local digits for numbers (default, although config can change default to en)
},
["lk"] = {
["in"] = "in", -- link LHS unit name or symbol
["off"] = "off", -- do not link: same as default except for hand unit
["on"] = "on", -- link all unit names or symbols (but not twice for the same unit)
["out"] = "out", -- link RHS unit name or symbol
},
["order"] = {
["flip"] = "opt_flip", -- reverse order of input/output
["out"] = "opt_order_out", -- do not show input; instead, use order in output combination, with the first output shown as the input
},
["qid"] = 'TEXT', -- TEXT should be a Wikidata Q item identifier
["qual"] = 'TEXT', -- TEXT should be a Wikidata Q item identifier
["round"] = {
["0.5"] = "opt_round=0.5", -- round output value to nearest 0.5
["5"] = "opt_round=5", -- round output value to nearest 5
["10"] = "opt_round=10", -- round output value to nearest 10 (same as but clearer than "|-1")
["25"] = "opt_round=25", -- round output value to nearest 25
["50"] = "opt_round=50", -- round output value to nearest 50
["each"] = "opt_round_each", -- using default precision in a range, round each output separately (default uses highest precision of each item in range)
},
["sigfig"] = 'INTEGER',
["sortable"] = {
["off"] = "", -- ignored (off is the default)
["on"] = "opt_sortable_on", -- output sort key for use in a sortable table, based on value from converting to a standard base unit
["debug"] = "opt_sortable_on, opt_sortable_debug", -- |sortable=debug is the same as |sortable=on|debug=yes
},
["sp"] = {
["us"] = "opt_sp_us", -- use U.S. spelling (like "meter" instead of default "metre")
},
["spell"] = { -- only English spelling is supported; not scientific notation; only some fractions
["in"] = "opt_spell_in", -- spell input value in words
["In"] = "opt_spell_in, opt_spell_upper", -- spell input value in words with first letter uppercase
["on"] = "opt_spell_in, opt_spell_out", -- spell input and output values in words
["On"] = "opt_spell_in, opt_spell_out, opt_spell_upper", -- same, with first letter of first word in result uppercase
["us"] = "opt_sp_us", -- use U.S. spelling; same as sp=us so spell=us also works
},
["stylein"] = 'TEXT',
["styleout"] = 'TEXT',
["tracking"] = 'TEXT',
}
local titles = {
["frac"] = "Fraction/styles.css",
["sfrac"] = "Sfrac/styles.css",
}
return {
SIprefixes = SIprefixes,
all_categories = all_categories,
all_messages = all_messages,
currency = { ['$'] = true, ['£'] = true, ['€'] = true, ['₱'] = true, ['₽'] = true, ['¥'] = true },
customary_units = customary_units,
disp_joins = disp_joins,
en_option_name = en_option_name,
en_option_value = en_option_value,
eng_scales = eng_scales,
ranges = ranges,
titles = titles,
}